The correct installation of Grease Hoses is crucial to the stable operation of mechanical equipment. Before installation, carefully check the quality of the oil pipes, check whether there are cracks or damage on the surface, and whether the thickness of the pipe wall is uniform to prevent defective oil pipes from leaking or bursting during use.
During installation, it is necessary to ensure that the direction of the oil pipes is reasonable, avoid excessive bending, folding or contact with sharp parts, so as to prevent the pipelines from being deformed and worn under pressure, affecting the normal flow of lubricating oil. The oil pipes between different components should be connected tightly, and joints of appropriate specifications should be selected and tightened according to the specified torque to prevent loosening and oil leakage.
After the installation is completed, a comprehensive inspection should be carried out. Check whether each connection is well sealed and whether there are any signs of leakage. After that, a trial run is required to observe whether the pressure of the Grease Hose is stable and whether the lubricating oil can reach each lubrication point smoothly. If any abnormality is found, the machine should be stopped immediately for investigation and treatment. In addition, the installation location should be convenient for subsequent maintenance and repair to provide guarantee for the long-term stable operation of the equipment.
