There are several common connection methods for Ultra High Pressure Hoses. The most common one is threaded connection, which is to install threaded connectors on both ends of the hose and then screw them together with the threaded interfaces on the equipment. This method is convenient for installation and disassembly, and is suitable for situations where the position of the equipment needs to be adjusted frequently, but it must be tightened during installation to prevent loosening and pressure leakage.
There is also a flange connection, aligning the flanges at both ends of the hose with the flanges of the equipment and fixing them with bolts. This connection method has good sealing performance and can withstand very high pressure. It is suitable for large equipment or fixed installation occasions. However, during installation, it is necessary to ensure that the gaskets between the flanges are intact and the bolts are tightened evenly.
Quick connector connection is also commonly used. It is like a plug and a socket. Just align the connector and insert it to connect, and pull it out to disconnect. This method is particularly fast to operate and is suitable for places where frequent disassembly and assembly are required, but it should be noted that the specifications of the connectors must match, otherwise it is easy to fall off.
Each connection method has its own advantages and applicable scenarios. Only by choosing the right method can the Ultra High Pressure Hose work safely and stably.
