How to correctly install and use the Micro Test Hose
Installation steps:
Check the hose: Make sure the Micro Test Hose is not damaged, deformed or blocked, and the joint is clean and free of impurities.
Correct connection: Align one end of the hose with the interface of the pressure measuring device, push it in gently and make sure the buckle or thread is fixed in place to avoid damage caused by forced twisting.
Fixed position: Try to keep the hose naturally bent during installation, avoid excessive bending or pulling, and prevent the internal channel from being deformed by pressure.
Sealing test: After the connection is completed, perform a low-pressure test first to observe whether there is any leakage or seepage.
Usage method:
Control the pressure range: Make sure that the working pressure does not exceed the pressure resistance value marked on the hose to prevent bursting.
Avoid extreme environments: High temperature, strong corrosion or severe vibration environment may affect the performance of the hose, and protective measures must be taken.
Regular inspection: Check whether the hose is aging or cracked before use. It is recommended to replace it after long-term use.
Proper installation and use can extend the life of the Micro Test Hose and ensure measurement accuracy.
