The Hydraulic Hose test Kit is a key equipment to ensure the safe and stable operation of the hydraulic system, and daily maintenance is essential.
After each use, the hydraulic oil and impurities remaining on the surface of the test kit should be cleaned in time to prevent corrosion of the parts. It can be wiped with a clean cloth. For stubborn stains, a small amount of special cleaning agent can be applied.
Check each connection part regularly to ensure that the fasteners such as bolts and nuts are not loose. If they are loose, they should be tightened in time to avoid leakage or connection failure during the test.
Pay special attention to the seals in the test kit and check whether they are aging or worn. Once a problem is found, it should be replaced immediately to ensure good sealing performance.
In addition, according to the manufacturer's regulations, the test kit should be lubricated and maintained regularly, and the appropriate lubricant should be selected and applied to the moving parts to reduce wear and extend the service life.
At the same time, the test kit should be stored in a dry, ventilated environment without corrosive gases, avoiding direct sunlight and rain. Only by doing these daily maintenance work can the Hydraulic Hose test Kit always keep in good working condition.
