Hydraulic Hose Connection Method

When matching hydraulic hose joints with other equipment, ensuring the seal between hydraulic hoses and hoses is the most critical step. Let's take a brief look at it below:
1. Sealing method for connecting hydraulic hose joints to hoses-the internal and external threads of quick connectors must be connected to hoses after using transition joints or adapters.
2. Sealing method for connecting hydraulic hose joints to hoses-no matter how many types of hose joints there are, you should choose the transition joint according to the type of hose joint. If the hose is an ordinary water pipe, you should use a transition joint with internal teeth on one end and a water pipe on the other end, and then fix it with a hose clamp. If both ends of the hose are internal teeth, you should use a transition joint with internal teeth on one end and external teeth on the other end. If both ends of the hose are external teeth, you should use a transition joint with internal teeth straight through.
3. Sealing method for connecting hydraulic hose joints to hoses-generally, hydraulic quick-change joints are required to withstand high pressure, so in most cases, high-pressure resistant oil pipes are used, and in most cases, both ends of the oil pipes are made of internal teeth, so it should be possible to connect directly.
4. Sealing method for connecting hydraulic hose joints and hoses - As for hydraulic joints, no other rubber rings are used for sealing. The product itself has one concave end and the other convex end, so it can be completely sealed after connection.